TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 134
copy tftp startup-config, 16 boot application
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
18.15 copy tftp startup-config Description The copy tftp startup-config command is used to download the configuration file to the switch from TFTP server. Syntax copy tftp startup-config ip-address ip-addr filename name Parameter ip-addr -- IP Address of the TFTP server. Both IPv4 and IPv6 addresses are supported, for example 192.168.0.1 or fe80::1234. name -- Specify the name for the configuration file which would be downloaded. Command Mode Privileged EXEC Mode Example Download the configuration file named as config.cfg to the switch from TFTP server with the IP 192.168.0.148: T1700X-16TS# copy tftp startup-config ip-address 192.168.0.148 filename config Download the configuration file named as config.cfg to the switch from TFTP server with the IP fe80::1234 T1700X-16TS# copy tftp startup-config ip-address fe80::1234 filename config 18.16 boot application Description The boot application command is used to configure the image file as startup image or backup image. Syntax boot application filename { image1 | image 2 } { startup | backup } no boot application Parameter image1 | image2 -- Specify the image file to be configured. By default, the image1.bin is the startup image and the image2.bin is the backup image. 120