TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 176
ACL Commands
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Chapter 25 ACL Commands 25.1 access-list create Description The access-list create command is used to create standard-IP ACL and extend-IP ACL. Syntax access-list create access-list-num Parameter access-list-num -- ACL ID, ranging from 500 to 2499. The ID range of Standard-IP ACL ranges is 500-1499 and the Extend-IP ACL is 1500-2499. Command Mode Global Configuration Mode Example Create a standard-IP ACL whose ID is 523: T1700X-16TS(config)# access-list create 523 25.2 access-list standard Description The access-list standard command is used to add Standard-IP ACL rule. To delete the corresponding rule, please use no access-list standard command. Standard-IP ACLs analyze and process data packets based on a series of match conditions, which can be the source IP addresses and destination IP addresses carried in the packets. Syntax access-list standard acl-id rule rule-id { deny | permit } [[ sip source-ip ] smask source-ip-mask] [[ dip destination-ip ] dmask destination-ip-mask ] no access-list standard acl-id rule rule-id Parameter acl-id -- The desired Standard-IP ACL for configuration. rule-id -- The rule ID. deny -- The operation to discard packets. permit --The operation to forward packets. It is the default value. 162