TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 258
lldp tlv-select, 9 lldp med-location
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Enable the SNMP notification for port 1: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/1 T1700X-16TS(config-if)# lldp snmp-trap 30.8 lldp tlv-select Description The lldp tlv-select command is used to configure TLVs to be included in outgoing LLDPDU. To exclude TLVs, please use no lldp tlv-select command. By default, All TLVs are included in outgoing LLDPDU. Syntax lldp tlv-select [ port-description | system-capability | system-description | system-name | management-address | port-vlan | protocol-vlan | vlan-name | link-aggregation | mac-phy-cfg | max-frame-size | power | all ] no lldp tlv-select [ port-description | system-capability | system-description | system-name | management-address | port-vlan | protocol-vlan | vlan-name | link-aggregation | mac-phy-cfg | max-frame-size | power | all ] Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Exclude "management-address" and "port-vlan-id" TLVs in LLDPDU outgoing from port 1: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/1 T1700X-16TS(config-if)# no lldp tlv-select management-address port-vlan 30.9 lldp med-location Description The lldp med-location command is used to configure the Location Identification TLV's content in outgoing LLDPDU of the port. 244