TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 172
loopback-detection recovery-time, 4 loopback-detectioninterface
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
24.3 loopback-detection recovery-time Description The loopback-detection recovery-time command is used to configure the time after which the blocked port would automatically recover to normal status. Syntax loopback-detection recovery-time recovery-time Parameter recovery-time -- The time after which the blocked port would automatically recover to normal status, and the loopback detection would restart. It is integral times of detection interval, ranging from 1 to 100 and the default value is 3. Command Mode Global Configuration Mode Example Configure the recovery-time as 3 times of detection interval: T1700X-16TS(config)# loopback-detection recovery-time 3 24.4 loopback-detection(interface) Description The loopback-detection command is used to enable the loopback detection function of the specified port. To disable it, please use no loopback-detection command. Syntax loopback-detection no loopback-detection Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Enable the loopback detection function of ports 1-3: T1700X-16TS(config)# interface range ten-gigabitEthernet 1/0/1-3 T1700X-16TS(Config-if-range)# loopback-detection 158