TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 199
show spanning-tree bridge, 25 show spanning-tree interface
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
26.24 show spanning-tree bridge Description The show spanning-tree bridge command is used to display the bridge parameters. Syntax show spanning-tree bridge [ forward-time | hello-time | hold-count | max-age | max-hops | mode | priority | state ] Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the bridge parameters: T1700X-16TS(config)# show spanning-tree bridge 26.25 show spanning-tree interface Description The show spanning-tree interface command is used to display the spanning-tree information of all ports or a specified port. Syntax show spanning-tree interface [ ten-gigabitEthernet port | port-channel lagid ] [ edge | ext-cost | int-cost | mode | p2p | priority | role | state | status ] Parameter port -- The Ethernet port number. lagid -- The ID of the LAG. Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the spanning-tree information of all ports: T1700X-16TS(config)# show spanning-tree interface Display the spanning-tree information of port 1/0/2: T1700X-16TS(config)# show spanning-tree interface ten-gigabitEthernet 1/0/2 Display the spanning-tree mode information of port 1/0/2: 185