TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 179
access-list policy action, 6 access-list bind aclinterface
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
25.5 access-list policy action Description The access-list policy action command is used to add ACLs and create actions for the policy. To set the detailed configuration of actions for a policy, please use access-list policy action command to access Action Configuration Mode. To delete the corresponding actions, please use no access-list policy action command. Syntax access-list policy action policy-name acl-id no access-list policy action policy-name acl-id Parameter policy-name -- The Policy Name, ranging from 1 to 16 characters. acl-id -- The ID of the ACL to which the above policy is applied. Command Mode Global Configuration Mode Example Add ACL whose ID is 120 to policy1 and create an action for them: T1700X-16TS(config)# access-list policy action policy1 120 25.6 access-list bind acl(interface) Description The access-list bind acl command is used to bind an ACL to the specified port. To cancel the bind relation, please use no access-list bind acl command. Syntax access-list bind acl acl-id no access-list bind acl acl-id Parameter acl-id -- The ID of the ACL desired to bind. Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Bind ACL 100 to port 1/0/2: 165