TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 202
IGMP Snooping Commands
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Chapter 27 IGMP Snooping Commands IGMP Snooping (Internet Group Management Protocol Snooping) is a multicast control mechanism running on Layer 2 switch. It can effectively prevent multicast groups being broadcasted in the network. 27.1 ip igmp snooping(global) Description The ip igmp snooping command is used to configure IGMP Snooping globally. To disable the IGMP Snooping function, please use no ip igmp snooping command. Syntax ip igmp snooping no ip igmp snooping Command Mode Global Configuration Mode Example Enable IGMP Snooping function: T1700X-16TS(config)# ip igmp snooping 27.2 ip igmp snooping rtime Description The ip igmp snooping rtime command is used to specify router port aging time globally. To restore the default timer, please use no ip igmp snooping rtime command. Syntax ip igmp snooping rtime route-time no ip igmp snooping rtime Parameter route-time -- Specify the aging time in seconds, ranging from 60 to 600. The default aging time is 300 seconds. Command Mode Global Configuration Mode Example Specify IGMP Snooping router port aging time as 100 seconds globally: T1700X-16TS(config)# ip igmp snooping rtime 100 188