TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 25
Accessing Path, Prompt, Logout or Access the next
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Interface Configuration Mode can also be divided into Interface Ethernet, Interface link-aggregation and some other modes, which is shown as the following diagram. User EXEC Mode Privileged EXEC Mode Global Configuration Mode Interface ten-gigabitEthernet Interface port-channel Interface range ten-gigabitEthernet Interface range port-channel Interface vlan ...... VLAN Configuration Mode The following table gives detailed information about the Accessing path, Prompt of each mode and how to exit the current mode and access the next mode. Mode Accessing Path Prompt Logout or Access the next mode User EXEC Mode Primary mode once it is connected with the switch. Privileged EXEC Mode Use the enable command to enter this mode from User EXEC mode. Global Configuration Mode Use the configure command to enter this mode from Privileged EXEC mode. T1700X-16TS> T1700X-16TS# T1700X-16TS (config)# Use the exit command to disconnect the switch. Use the enable command to access Privileged EXEC mode. Enter the exit command to return to User EXEC mode. Enter configure command to access Global Configuration mode. Use the exit or the end command or press Ctrl+Z to return to Privileged EXEC mode. Use the interface ten-gigabitEthernet port or interface range ten-gigabitEthernet port-list command to access interface Configuration mode. Use the vlan vlan-list to access VLAN Configuration mode. 11