TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 154
bandwidth, 12 clear counters
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
20.11 bandwidth Description The bandwidth command is used to configure the bandwidth limit for an Ethernet port. To disable the bandwidth limit, please use no bandwidth command. Syntax bandwidth {[ ingress ingress-rate ] [ egress egress-rate ]} no bandwidth { all | ingress | egress } Parameter ingress-rate -- Specify the bandwidth for receiving packets. Range: 1-10000000Kbps for the gigaport. egress-rate -- Specify the bandwidth for sending packets. Range: 1-10000000Kbps for the gigaport. Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Configure the ingress-rate as 5120Kbps and egress-rate as 1024Kbps for port 1/0/5: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/5 T1700X-16TS(config-if)# bandwidth ingress 5120 egress 1024 20.12 clear counters Description The clear counters command is used to clear the statistics information of all the Ethernet ports and LAGs. Syntax clear counters clear counters interface [ ten-gigabitEthernet port ] [ port-channel lagid ] Parameter port -- The Ethernet port number. lagid -- The ID of the LAG. Command Mode Privileged EXEC Mode and Any Configuration Mode 140