TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 241
snmp-server traps
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
T1700X-16TS(config)# snmp-server engineID local 1234567890 remote abcdef123456 29.8 snmp-server traps Description The snmp-server traps command is used to enable SNMP extended traps. To disable the sending of SNMP extended traps, please use no snmp-server traps command. Syntax snmp-server traps { bandwidth-control | cpu | flash | lldp | loopback-detection | storm-control | spanning-tree | memory } no snmp-server traps { bandwidth-control | cpu | flash | lldp | loopback-detection | storm-control | spanning-tree | memory } Parameter bandwidth-control -- Enable bandwidth-control trap. It is sent when the rate limit function is enabled and the bandwidth exceeds the predefined value. cpu -- Allow CPU-related trap. It is sent when CPU usage exceeds the predefined threshold. By default, the CPU usage threshold of the switch is 80%. flash -- Enable flash trap. It is sent when flash is modified during operations such as backup, reset, firmware upgrade, configuration import, etc. lldp -- Enable LLDP trap. It is sent when the port's neighbor changes. loopback-detection -- Enable loopback-detection trap. It is sent when the switch detects loopback or loopback is cleared. storm-control -- Enable storm-control trap. It is sent when the multicast or broadcast rate exceeds the predefined value. spanning-tree -- Enable spanning-tree trap. It is sent when the port forwarding status changes or the port receives TCN packet or packet with TC flag. memory -- Enable memory trap. It is sent when CPU usage exceeds 80%. Command Mode Global Configuration Mode Example Enable SNMP extended bandwidth-control trap for the switch: T1700X-16TS(config)# snmp-server traps bandwidth-control 227