TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 149
description, 4 shutdown
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
User Guidelines Command in the interface range ten-gigabitEthernet Mode is executed independently on all ports in the range. It does not affect the execution on the other ports at all if the command results in an error on one port. Example To enter the Interface range ten-gigabitEthernet Configuration Mode, and configure ports 1, 2, 3, 6, 7 and 9 at the same time by adding them to one port-list: T1700X-16TS(config)# interface range ten-gigabitEthernet 1/0/1-3,1/0/6-7,1/0/9 20.3 description Description The description command is used to add a description to the Ethernet port. To clear the description of the corresponding port, please use no description command. Syntax description string no description Parameter string -- Content of a port description, ranging from 1 to 16 characters. Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Add a description Port _5 to port 1/0/5: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/5 T1700X-16TS(config-if)# description Port_5 20.4 shutdown Description The shutdown command is used to disable an Ethernet port. To enable this port again, please use no shutdown command. 135