TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 187
spanning-tree mst configuration, 5 spanning-tree mst instance
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Example Configure the spanning-tree mode as mstp: T1700X-16TS(config)# spanning-tree mode mstp 26.4 spanning-tree mst configuration Description The spanning-tree mst configuration command is used to access MST Configuration Mode from Global Configuration Mode, as to configure the VLAN-Instance mapping, region name and revision level. To return to the default configuration of the corresponding Instance, please use no spanning-tree mst configuration command. Syntax spanning-tree mst configuration no spanning-tree mst configuration Command Mode Global Configuration Mode Example Enter into the MST configuration mode: T1700X-16TS(config)# spanning-tree mst configuration T1700X-16TS(Config-mst)# 26.5 spanning-tree mst instance Description The spanning-tree mst instance command is used to configure the priority of MST instance. To return to the default value of MST instance priority, please use no spanning-tree mst instance command. Syntax spanning-tree mst instance instance-id priority pri no spanning-tree mst instance instance-id priority Parameter instance-id -- Instance ID, ranging from 1 to 8. pri -- MSTI Priority, which must be multiple of 4096 ranging from 0 to 61440. By default, it is 32768. MSTI priority is an important criterion on determining if the switch will be chosen as the root bridge in the specific instance. 173