TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 260
lldp med-tlv-select, 12 show lldp
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Enable the LLDP-MED feature for port 2: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/2 T1700X-16TS(config-if)# lldp med-status 30.11 lldp med-tlv-select Description The lldp med-tlv-select command is used to configure LLDP-MED TLVs to be included in outgoing LLDPDU for the corresponding port. To exclude LLDP-MED TLVs, please use no lldp med-tlv-select command. By default, All TLVs are included in outgoing LLDPDU. Syntax lldp med-tlv-select { [inventory-management] [location] [network-policy] [power-management] [all] } no lldp med-tlv-select { [inventory-management] [location] [network-policy] [power-management] [all] } Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Exclude "network policy" and "inventory" TLVs in LLDPDU outgoing from port 2: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/2 T1700X-16TS(config-if)# no lldp med-tlv-select network-policy inventory-management 30.12 show lldp Description The show lldp command is used to display the global configuration of LLDP and LLDP-MED fast start repeat count number. Syntax show lldp 246