TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 195
spanning-tree bpdufilter
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
no spanning-tree mst instance instance-id Parameter instance-id -- Instance ID, ranging from 1 to 8. pri -- Port Priority, which must be multiple of 16 ranging from 0 to 240. By default, it is 128. Port Priority is an important criterion on determining if the port will be chosen as the root port by the device connected to this port. cost -- Path Cost, ranging from 0 to 200000. The lower value has the higher priority. Its default value is 0 meaning "auto". Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Configure the priority of port 1 in MST Instance 1 as 64, and path cost as 2000: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/1 T1700X-16TS(config-if)# spanning-tree mst instance 1 port-priority 64 cost 2000 26.17 spanning-tree bpdufilter Description The spanning-tree bpdufilter command is used to enable the BPDU filter function for a port. With the function enabled, the port can be prevented from receiving and sending any BPDU packets. To disable the BPDU filter function, please use no spanning-tree bpdufilter command. Syntax spanning-tree bpdufilter no spanning-tree bpdufilter Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Enable the BPDU filter function for port 1/0/2: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/2 T1700X-16TS(config-if)# spanning-tree bpdufilter 181