TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 223
ipv6 mld snooping querier vlan
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
no ipv6 mld snooping multi-vlan-config [ rtime router-time | mtime member-time | rport interface { ten-gigabitEthernet port-list | port-channel lagid } ] Parameter vlan-id -- The ID of the multicast VLAN desired to create or modify, ranging from 2 to 4094. If not specified, the default multicast VLAN will be selected. router-time -- Router Port Time. Within this time, if the switch does not receive MLD query message from the router port, it will consider this port is not a router port any more. Router Port Time ranges from 60 to 600 in seconds. By default, it is 0 and the global router-time will be used. member-time -- Member Port Time. Within this time, if the switch does not receive MLD report message from the member port, it will consider this port is not a member port any more. Member Port Time ranges from 60 to 600 in seconds. By default, it is 0 and the global member-time will be used. port-list -- The list of Ethernet ports. lagid -- The ID of the LAGs. Command Mode Global Configuration Mode Example Enable Multicast VLAN 3, and configure Router Port Time as 100 seconds, Member Port Time 100 seconds, and Static Router Port port 1/0/3: T1700X-16TS(config)# ipv6 mld snooping multi-vlan-config 3 rtime 100 T1700X-16TS(config)# ipv6 mld snooping multi-vlan-config 3 mtime 100 T1700X-16TS(config)# ipv6 mld snooping multi-vlan-config 3 rport interface ten-gigabitEthernet 1/0/3 28.10 ipv6 mld snooping querier vlan Description The ipv6 mld snooping querier vlan command is used to enable the MLD Querier function. To disable this function, please use no ipv6 mld snooping querier vlan command. Syntax ipv6 mld snooping querier vlan vlan-id no ipv6 mld snooping querier vlan vlan-id 209