TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 86
ARP Inspection Commands
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 12 ARP Inspection Commands ARP (Address Resolution Protocol) Detect function is to protect the switch from the ARP cheating, such as the Network Gateway Spoofing and Man-In-The-Middle Attack, etc. 12.1 ip arp inspection(global) Description The ip arp inspection command is used to enable the ARP Detection function globally. To disable the ARP Detection function, please use no ip arp detection command. Syntax ip arp inspection no ip arp inspection Command Mode Global Configuration Mode Example Enable the ARP Detection function globally: T1700X-16TS(config)#ip arp inspection 12.2 ip arp inspection(interface) Description The ip arp inspection command is used to enable the ARP Defend function. To disable the ARP detection function, please use no ip arp inspection command. ARP Attack flood produces lots of ARP Packets, which will occupy the bandwidth and slow the network speed extremely. With the ARP Defend enabled, the switch can terminate receiving the ARP packets for 300 seconds when the transmission speed of the legal ARP packet on the port exceeds the defined value so as to avoid ARP Attack flood. Syntax ip arp inspection no ip arp inspection 72