TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 36
switchport pvid, 6 show vlan summary
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Parameter vlan-list -- Specify IEEE 802.1Q VLAN ID list, ranging from 2 to 4094, in the format of 2-3, 5. It is multi-optional. tagged | untagged -- Egress rule,untagged or tagged. Tagged: All packets forwarded by the port are tagged. The packets contain VLAN information. Untagged: Packets forwarded by the port are untagged. Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Add port 4 it to VLAN 2 and configure the type of port 1/0/4 as tagged: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/4 T1700X-16TS(config-if)# switchport general allowed vlan 2 tagged 3.5 switchport pvid Description The switchport pvid command is used to configure the PVID for the switch ports. Syntax switchport pvid vlan-id Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Specify the PVID of port 1/0/2 as 2: T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/2 T1700X-16TS(config-if)# switchport pvid 2 3.6 show vlan summary Description The show vlan summary command is used to display the summarized information of IEEE 802.1Q VLAN. 22