TP-Link T1700X-16TS T1700X-16TSUN V1 CLI Reference Guide - Page 83
ip dhcp snooping limit rate, ip dhcp snooping decline rate
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
11.10 ip dhcp snooping limit rate Description The ip dhcp snooping limit rate command is used to enable the Flow Control feature for the DHCP packets. The excessive DHCP packets will be discarded. To restore to the default configuration, please use no ip dhcp snooping limit rate command. Syntax ip dhcp snooping limit rate value no ip dhcp snooping limit rate Parameter value -- The value of Flow Control. The options are 5/10/15/20/25/30 (packet/second). The default value is 0, which stands for "disable". Command Mode Interface Configuration Mode (interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Set the Flow Control of Ten-gigabitEthernet port 2 as 20 pps: T1700X-16TS(config)#interface ten-gigabitEthernet 1/0/2 T1700X-16TS(config-if)#ip dhcp snooping limit rate 20 11.11 ip dhcp snooping decline rate Description The ip dhcp snooping decline rate command is used to enable the Decline Protect feature and configure the rate limit on DHCP Decine packets. The excessive DHCP Decline packets will be discarded. To disable the Decline Protect feature, please use no ip dhcp snooping decline rate command. Syntax ip dhcp snooping decline rate value no ip dhcp snooping decline rate 69