TP-Link TL-MR6400 TL-MR6400 V1 User Guide - Page 101
TL-MR6400, Default Gateway, MTU Size, MTU Size, Primary/Secondary DNS, PPPoE/Russia PPPoE, User Name
![]() |
View all TP-Link TL-MR6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
TL-MR6400 300Mbps Wireless N 4G LTE Router Default Gateway - (Optional) Enter the gateway IP address provided by your ISP in dotted-decimal notation. MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP. Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal notation provided by your ISP. 3. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. And you should enter the following parameters (Figure 5-5): Figure 5-5 WAN - PPPoE User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Confirm Password - Re-enter the Password provided by your ISP to ensure the Password you entered is correct. Secondary Connection - It's available only for PPPoE Connection. If your ISP provides an extra Connection type such as Dynamic/Static IP to connect to a local area network, then you can check the radio button of Dynamic/Static IP to activate this secondary connection. • Disabled - The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended. -89-
![](/manual_guide/products/tplink-tlmr6400-tlmr6400-v1-user-guide-f1c123e/101.png)