TP-Link TL-MR6400 TL-MR6400 V1 User Guide - Page 17
The Rear Panel - reset
![]() |
View all TP-Link TL-MR6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
1.4.2 The Rear Panel TL-MR6400 300Mbps Wireless N 4G LTE Router Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided. POWER ON/OFF: The switch for the power. LAN (1, 2, 3): These ports (1, 2, 3) connect the router to the local PC(s). LAN4/WAN: This port can be LAN or WAN port depending on the working mode. WPS/RESET: This button is used for both WPS and RESET function. • Used as RESET button With the router powered on, press and hold down the WPS/RESET button on the rear panel of the router until the Power LED starts flashing. The router will restore and reboot automatically. • Used as WPS button If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can press this button to quickly establish a connection between the router and client devices and automatically configure wireless security for your wireless network. WiFi ON/OFF: This switch is used to enable/disable the router's wireless function. SIM Card: Insert the SIM card into the slot. -5-
![](/manual_guide/products/tplink-tlmr6400-tlmr6400-v1-user-guide-f1c123e/17.png)