TP-Link TL-MR6400 TL-MR6400 V1 User Guide - Page 65
Local Management
View all TP-Link TL-MR6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
TL-MR6400 300Mbps Wireless N 4G LTE Router gateway to support address and port translation for certain application layer "control/data" protocols such as FTP, TFTP, H323 etc. FTP ALG - To allow FTP clients and servers to transfer data across NAT, click Enable. TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, click Enable. H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT, click Enable. RTSP ALG - To allow some media player clients to communicate with some streaming media servers across NAT, click Enable. SIP ALG - To allow some multimedia clients to communicate across NAT, click Enable. Click the Save button to save your settings. 4.12.2 Local Management Choose menu "Security → Local Management", you can configure the management rule in the screen as shown in Figure 4-44. The management feature allows you to deny LAN computers from accessing the router. Figure 4-44 Local Management By default, the radio button All the PCs on the LAN are allowed to access the Router's Web-Based Utility is selected. If you want to allow PCs with specific MAC Addresses to access the Setup page of the router's Web-Based Utility locally, from inside the network, click the radio button Only the PCs listed can browse the built-in web pages to perform Administrator tasks, and then enter each MAC Address in a separate field. The format for the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the MAC address listed can use the password to browse the built-in web pages to perform Administrator tasks and all the others will be blocked. After click the Add button, your PC's MAC Address will be placed in the Control List above. Click the Save button to save your settings. -53-