TP-Link TL-MR6400 TL-MR6400 V1 User Guide - Page 113
DHCP, 10 Forwarding
![]() |
View all TP-Link TL-MR6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
TL-MR6400 300Mbps Wireless N 4G LTE Router 5.8.2 Wireless Statistics Choose menu "Guest Network → Wireless Statistics", and then you can see the MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station. Figure 5-15 Guest Network - Wireless Statistics MAC Address - The connected wireless station's MAC address. Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected. Received Packets - Packets received by the station. Sent Packets - Packets sent by the station. Configure - The button is used for loading the item to the Wireless MAC Filtering list. Deny: if the Wireless MAC Filtering function enable, deny the station to access. Allow: if the Wireless MAC Filtering function enable, allow the station to access. You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button. If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return to the previous page. Note: This page will be refreshed automatically every 5 seconds. 5.9 DHCP The configuration is similar to DHCP in 3G/4G Router mode. Please refer to 4.10 DHCP. 5.10 Forwarding The configuration is similar to Fowarding in 3G/4G Router mode. Please refer to 4.11 Forwarding. -101-
![](/manual_guide/products/tplink-tlmr6400-tlmr6400-v1-user-guide-f1c123e/113.png)