TP-Link TL-MR6400 TL-MR6400 V1 User Guide - Page 38
LTE Data Settings
![]() |
View all TP-Link TL-MR6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
TL-MR6400 300Mbps Wireless N 4G LTE Router authentication with the peer using two handshakes. Select this option if the ISP requires this authentication type. • CHAP - Challenge Handshake Authentication Protocol. This protocol allows the device to establish authentication with the peer using three handshakes and checking the peer identity periodically. Select this option if the ISP requires this authentication type. Click the Delete button to delete a profile. Click the Create button to create a new profile. Click the Save button to save your settings. 4.6.2 LTE Data Settings Choose menu "Network → LTE Data Settings", You can configure data settings on this page. Figure 4-8 LTE Data Settings Total/Monthly Used - Total/Monthly data used. You can click Correct and input the actual data amount to correct the data. Data Limit - You can enable or disable the function of data limit. If enabled, you can set the data quota and usage alert. Total/Monthly Allowance - Set the allowed amount of total/monthly data. When data usage exceeds the allowance, the device will disconnect Internet and display a message on the screen asking whether to connect Internet. Monthly Data Statistic - You can enable or disable the function of traffic data resetting. Start Date - Enable the function and schedule a date, the data will reset to zero on the date. If disabled, total data information is displayed. If enabled, monthly data information is displayed. Click the Save button to save your settings. -26-
![](/manual_guide/products/tplink-tlmr6400-tlmr6400-v1-user-guide-f1c123e/38.png)