TP-Link TL-MR6400 TL-MR6400 V1 User Guide - Page 34
Use the Wi-Fi Protected Setup Button
View all TP-Link TL-MR6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TL-MR6400 300Mbps Wireless N 4G LTE Router Figure 4-2 WPS WPS Status - Enable or disable the WPS function here. Current PIN - The current value of this device's PIN displayed here. The default value can be found in the label. Restore PIN - Restore the PIN of this device to its default. Gen New PIN - Click this button, and then you can get a new random value for this device's PIN. You can ensure the network security by generating a new PIN. Disable PIN of this device - You can disable the router's PIN manually here. If the router receives multiple failed attempts to authenticate an external registrar, this function will be disabled automatically. Add Device - You can add the new device to the existing network manually by clicking this button. b). To add a new device: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless adapter and Router using either Push Button Configuration (PBC) method or PIN method. Note: To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. I. Use the Wi-Fi Protected Setup Button Use this method if your client device has a WPS button. Step 1: Press the WPS/RESET button on the back panel of the router. You can also keep the default WPS Status as Enabled and click the Add Device button in Figure 4-2, then Choose "Press the button of the new device in two minutes" and click Connect. (Shown in the following figure) -22-