TP-Link TL-MR6400 TL-MR6400 V1 User Guide - Page 109
MAC Clone, 6.3 LAN
View all TP-Link TL-MR6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
TL-MR6400 300Mbps Wireless N 4G LTE Router provides, please refer to the ISP. The various types of Internet connections that the router can detect are as follows: PPPoE - Connections which use PPPoE that requires a user name and password. Dynamic IP - Connections which use dynamic IP address assignment. Static IP - Connections which use static IP address assignment. The router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually. 5.6.2 MAC Clone Choose menu "Network → MAC Clone", and then you can configure the MAC address of the WAN on the screen below, Figure 5-10: Figure 5-10 MAC Address Clone Some ISPs require that you register the MAC Address of your adapter. Changes are rarely needed here. WAN MAC Address - This field displays the current MAC address of the WAN port. If your ISP requires you to register the MAC address, please enter the correct MAC address into this field in XX-XX-XX-XX-XX-XX format(X is any hexadecimal digit). Your PC's MAC Address - This field displays the MAC address of the PC that is managing the router. If the MAC address is required, you can click the Clone MAC Address button and this MAC address will fill in the WAN MAC Address field. Click Restore Factory MAC to restore the MAC address of WAN port to the factory default value. Click the Save button to save your settings. Note: Only the PC on your LAN can use the MAC Address Clone function. 5.6.3 LAN Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on the screen as below. -97-