TP-Link TL-MR6400 TL-MR6400 V1 User Guide - Page 99
Network
View all TP-Link TL-MR6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
5.6 Network TL-MR6400 300Mbps Wireless N 4G LTE Router Figure 5-2 the Network menu There are four submenus under the Network menu (shown in Figure 5-2): WAN, MAC Clone, LAN and VLAN. Click any of them, and you will be able to configure the corresponding function. 5.6.1 WAN Choose menu "Network → WAN", and then you can configure the IP parameters of the WAN on the screen below. 1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the router will automatically get IP parameters from your ISP. You can see the page as follows (Figure 5-3): Figure 5-3 WAN - Dynamic IP -87-
TL-MR6400
300Mbps Wireless N 4G LTE Router
5.6 Network
Figure 5-2
the Network menu
There are four submenus under the Network menu (shown in
Figure 5-2):
WAN
,
MAC Clone
,
LAN
and
VLAN.
Click any of them, and you will be able to configure the corresponding function.
5.6.1 WAN
Choose menu “
Network
→
WAN
”, and then you can configure the IP parameters of the WAN
on the screen below.
1.
If your ISP provides the DHCP service, please choose
Dynamic IP
type,
and the router will
automatically get IP parameters from your ISP. You can see the page as follows (Figure
5-3):
Figure 5-3
WAN - Dynamic IP
-87-