TRENDnet TEW-816DRM User's Guide - Page 32
Change your router IP address, Set up the DHCP server on your router
View all TRENDnet TEW-816DRM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
TRENDnet User's Guide TEW-816DRM Enable Service: Select to enable feature Name: Enter your desired connection name. Change your router IP address Setup > Local Network In most cases, you do not need to change your router IP address settings. Typically, the router IP address settings only needs to be changed, if you plan to use another router in your network with the same IP address settings, if you are connecting your router to an existing network that is already using the IP address settings your router is using, or if you are experiencing problems establishing VPN connections to your office network through your router. Note: If you are not encountering any issues or are not faced with one of the cases described above or similar, it is recommended to keep your router IP address settings as default. Default Router IP Address: 192.168.10.1 Default Router Network: 192.168.10.0 / 255.255.255.0 1. Log into your router management page (see "Access your router management page" on page 23). 2. Click on Setup, and click on Local Network. 3. Review the settings and click Apply to save changes. © Copyright 2015 TRENDnet. All Rights Reserved. Router IP Address: Enter the new router IP address. (e.g. 192.168.200.1) Note: You will need to access your router management page using your new router IP address to access the router management page. (e.g. Instead of using the default http://192.168.10.1 using your new router IP address will use the following format using your new router IP address http://(new.router.ipaddress.here) to access your router management page. Subnet Mask: Enter the subnet mask of the router (e.g. 255.255.255.0) Domain Name: Enter the domain name to assign your router. Configure second IP address and Subnet: Click to enable option IP Address: Enter the second IP address Subnet Mask: Enter the subnet mask to assign. (e.g. 255.255.255.0) Note: The DHCP address range will change automatically to your new router IP address settings so you do not have to change the DHCP address range manually to match your new router IP address settings. Set up the DHCP server on your router Setup > Local Network Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to automatically assign an IP address to each computer or device on your network. The DHCP server is enabled by default on your router. If you already have a DHCP server on your network, or if you do not want to use your router as a DHCP server, you can disable this setting. It is recommended to leave this setting enabled. 29