TRENDnet TPL-410AP User's Guide - Page 29
Check the access point system information, Wireless OP Mode
View all TRENDnet TPL-410AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
TRENDnet User's Guide Check the access point system information Status > Information You may want to check the system information of your access point such as IP address settings, access point mode, wireless and wired network settings, access point wireless MAC addresses, and firmware version. 1. Log into your access point management page (see "Access your access point management page" on page 9). 2. Click on Status and click on Information. System Information • Firmware Version - The current firmware version your access point is running. • Build Day - The build day and time of the current firmware version your access point is running. • System Up Time - The duration your access point has been running continuously without a restart/power cycle (hard or soft reboot) or reset. TPL-410AP / TPL-410APK Ethernet Information • IP Address - The current IP address settings assigned to your access point. • Subnet Mask - The current subnet mask assigned to your access point. • Default Gateway - The current gateway assigned to your access point. • MAC Address: Displays the current Ethernet wired interface MAC address. Wireless LAN • Wireless OP Mode: Displays the current wireless mode. • Name (SSID): Displays the current wireless network name assigned to your access point. • Channel - Displays the current wireless channel your access point is operating. • Security Mode: Displays the wireless security type applied. • MAC Address: The MAC address of your access point's wireless LAN or interface configuration. Powerline Interface • MAC Address: The MAC address of your access point's powerline interface configuration. © Copyright 2014 TRENDnet. All Rights Reserved. 27