Toshiba Tecra M2-S410 Instruction Manual - Page 199

AT Commands T Select tone dialing This command instructs the modem to send DTMF tones while dialing. Dialed digits are tone dialed until a P command or dial modifier is received. This is the default setting. Vn DCE response format This command controls whether result codes (including call progress and negotiation progress messages) are displayed as words or their numeric equivalents. V0 Displays result codes as digits. V1 Displays result codes as text (default). Result Codes: OK n=0,1 ERROR Otherwise Xn Result code selection, call progress monitoring This command selects which result codes will be used by the modem. Command Dial tone detect X0 Disable Busy signal detect Disable X1 Disable Disable X2 Enable Disable X3 Disable Enable X4 (default) Enable Enable X5 Enable Enable Supported Result Code OK, CONNECT, RING, NO CARRIER, ERROR OK, RING, NO CARRIER, ERROR, CONNECT OK, RING, NO CARRIER, ERROR, NODIALTONE, CONNECT OK, RING, NO CARRIER, ERROR, BUSY, CONNECT , BLACKLISTED OK, RING, NO CARRIER, ERROR, NODIALTONE, BUSY, CONNECT , DELAYED, BLACKLISTED, REORDER, WARBLE, CALL WAITING DETECTED OK, RING, NO CARRIER, ERROR, NODIALTONE, BUSY, CONNECT , RRING, NO BONGTONE, DELAYED, BLACKLISTED, REORDER, WARBLE, CALL WAITING DETECTED User's Manual C-5