Toshiba WT10-A32M Encore 2 WT8-B/WT10-A Windows 8.1 combined User's Guide - Page 83
Problems when you turn on the device, If Something Goes Wrong
View all Toshiba WT10-A32M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
If Something Goes Wrong Problems when you turn on the device 83 If you are working in a program that suddenly freezes, chances are the program has stopped responding. You can exit the program without shutting down the operating system or closing other programs. Problems when you turn on the device These problems may occur when you turn on the power. The device will not start. Make sure you attached the USB Power cable to the USB/AC adaptor properly. Press and hold the Power button for at least 5 seconds, and then swipe down where indicated. If you are using the USB/AC adaptor, check that the wall outlet is working by plugging in another device, such as a lamp. The device displays the WARNING RESUME FAILURE/Windows Error Recovery - Windows did not shut down successfully message. To continue, select Start Windows normally. This can happen if the device was put into Sleep mode and the battery has discharged. If you performed a shutdown before this message was displayed, a program or driver may have prevented Windows® from shutting down. Data stored in the device's memory has been lost. Data stored in the device's internal storage drive may not be affected. Always save your data even when you are using Sleep mode. If your battery fully discharges, information that has not been saved will be lost. Your device can be configured to warn you when a battery is running low see "What to do when the battery runs low" on page 61. If you are running on battery power, it is recommended that you do not leave the device in Sleep mode for long periods of time. To charge a battery, leave the device plugged into a live wall outlet for several hours. For more information see "Charging the battery" on page 59.