Yamaha PSR-3000 Owner's Manual - Page 16
Playing the Keyboard, Power Supply
View all Yamaha PSR-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Introduction Playing the Keyboard Power Supply 1 Make sure that the PSR-3000/1500's STANDBY/ON switch is set to STANDBY (off). 2 Connect one end of the AC cable to the PA-300. WARNING Do not attempt to use an AC adaptor other than the Yamaha PA-300 or an equiva- lent recommended by Yamaha. The use of an incom- patible adaptor may cause irreparable damage to the 3 PSR-3000/1500, and may even pose a serious shock hazard! ALWAYS UNPLUG THE AC ADAPTOR FROM THE AC POWER OUTLET WHEN THE PSR-3000/1500 IS NOT IN USE. CAUTION Never interrupt the power supply (e.g. unplug the AC adaptor) during any PSR3000/1500 record operation! Doing so can result in a loss of data. CAUTION Even when the switch is in the "STANDBY" position, electric- ity is still flowing to the instrument at a minimum 4 level. When not using the PSR-3000/1500 for an extended period of time, be sure to unplug the AC power adaptor from the wall AC out- let. Connect the PA-300's DC plug to the PSR-3000/1500's DC IN terminal on the instrument's rear panel. DC IN To electrical outlet Connect the other end (normal AC plug) to the nearest electrical outlet. 16 PSR-3000/1500 Owner's Manual