Yamaha PSR-3000 Owner's Manual - Page 27

Quick Guide 1 Press the [SONG SELECT] button to call up the Song Selection display. 2 Press the TAB [√]/[®] buttons to select the desired drive (PRESET/USER/CARD). About PRESET/USER/CARD PRESET Internal memory to which the preprogrammed data are installed as preset data. USER Internal memory that allows both reading and writing of data. CARD For transferring data to and from SmartMedia, with the PSR-3000/1500's card slot. n When the USB storage device such as the Floppy Disk drive will be connected to the USB [TO DEVICE] connector, "USB1" will be displayed on the File Selection display. 3 Select a folder (if necessary). Several Songs may be together in a folder. In this case, the folder(s) will appear in the display (see the illustration at right). Press one of the [A]-[J] buttons to select a folder. 4 Select a page (if the display has several pages). When the drive contains more than ten Songs, the display is divided up into several pages. The page indications are shown at the bottom of the display. Press one of the [1π]-[6π] buttons to select a page. 5 Press one of the [A]-[J] buttons to select a Song. You can also select a Song by using the [DATA ENTRY] dial, then press the [ENTER] button to execute. 6 Press the [EXIT] button to return to the previous display. Operation of the Function Display In the Function display, you can make detailed settings. In the example here, we'll call up and use the keyboard touch sensitivity setting display. 1 Press the [FUNCTION] button. Categories of detailed settings are shown. *Note that VIDEO OUT is available only on the PSR-3000. PSR-3000/1500 Owner's Manual 27