Yamaha PSR-3000 Owner's Manual - Page 191
Using the Footswitch or Foot Controller ([FOOT PEDAL] jack)
View all Yamaha PSR-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Using the Footswitch or Foot Controller ([AUX PEDAL] jack) 5 Using the Footswitch or Foot Controller ([FOOT PEDAL] jack) Two FOOT PEDAL jacks can be used via the following functions at the initial default setting (factory setting). • FOOT PEDAL 1 jack Plug an optional Yamaha FC4 or FC5 footswitch into this jack and use it to switch sustain on and off. The footswitch functions like the damper pedal on a piano - press for sustain, release for normal sound. • FOOT PEDAL 2 jack Plug an optional Yamaha FC7 foot controller into this jack and use it to change the volume as you play the PSR-3000/1500 (expression function). Foot Pedals Footswitch FC4 (optional) Footswitch FC5 (optional) Foot Controller FC7 (optional) CAUTION Make sure to connect or disconnect the pedal only when the power is off. Assigning Specific Functions to Each Foot Pedal The functions assigned by default to the connected footswitch or foot controller can be changed-for example, letting you use the footswitch to start/stop Style playback, or use the foot controller to produce pitch bends. 1 Call up the operation display. [FUNCTION] → [D] CONTROLLER → TAB [√] FOOT PEDAL 2 Use the [A]/[B] buttons to select one of the two foot pedals to which the function is to be assigned. 3 Use the [1π†] button to select the functions to be assigned to the pedal specified in step 2. Details on the pedal functions are listed below. 4 Use the [2π†]-[8π†] buttons to set the details of the selected functions. The available parameters differ depending on the function selected in step 3. Details on the parameters are given below. 5 Check that the desired function is controllable with the pedal by actually pressing the pedal. Set the polarity of the pedal Pedal on/off operation may differ depending on the particular pedal you've connected to the instrument. For example, pressing down on one pedal may turn the selected function on, while pressing a different make/brand of pedal may turn the function off. If necessary, use this setting to reverse the control. Press the [I] (PEDAL POLARITY) button to switch the polarity. Details on the pedal functions are listed here. For func- * tions indicated with " ", use only the foot controller; proper operation cannot be done with a footswitch. Using Your Instrument with Other Devices PSR-3000/1500 Owner's Manual 191