Yamaha REV7 REV7 Owners Manual Image - Page 29
Specifications
View all Yamaha REV7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
SPECIFICATIONS INPUT Number of Channels Nominal Level Impedance Level Control Mono/Stereo SW. Mixing Parametric EQ Level Monitor A/D CONVERSION Sampling Freq. Quantization Band Width Number of Channels Electronically Balanced x 2 (Phone Jack) Electronically Balanced x 2 (XLR type) +4 dBm 10Kohms Volume, Gain +10 dB - -90dB Mono - Ch.L + R Activated. Stereo - Ch.L & R Activated. In Stereo mode, Ch. L & R are mixed and sent to'A/D converter. Low: 50-700Hz +15, Mid: 350 - 7kHz +15, High: 2k -20kHz +15 3 bands. 8 points LED (pre - AID) 31.25kHz Linear 16 Bit 20Hz to 12kHz 1 MEMORY Presets (ROM) User Memory (RAM) MIDI CONTROL FRONT PANEL Display Knobs Keys 1 -30 31-90 (Non Volatile) All parameters except Input Level and parametric EQ, can be memorized MIDI Channel, Program Number 16 character 2 lines LCD x 1 2 digits numeric LED for Memory No. 8 points level meter LED Input Level Volume Parametric EQ (Low, Mid, High) Function Keys Numeric and +/- Keys Direct and BYPASS ON/OFF Keys MUTE, MIDI SIGNAL PROCESSING Functions Factory Presets (30) Reverb Time (RT) Initial Delay 1st Reflection High Freq. RT (F1) Low Freq. RT (F2) Diffusion Reverb-1 - LARGE HALL Reverb-2 - SMALL HALL Reverb-3 - VOCAL PLATE Reverb-4 - PERCUSSION PLATE E/R - 1 -EARLY REFLECTION-1 E/R - 2 -EARLY REFLECTION-2 OTHERS - DELAY (Number 7) to LIVE REFERENCE (Number 30) 0.3 to 10.0 sec, on Mid. band 0.1 to 100.0 msec. Delay Time (0 to 100.0 msec) & Level (0-100%) Mid. RT x 10.1 -1.0) Mid. RT x (0.1 -2.4) Diffusion (10 steps) D/A CONVERSION Number of Channels Sampling Freq. Quantization Band Width 2 31.25 kHz Linear 16 Bit 20 Hz to 12 kHz OUTPUT Number of Channels Nominal Level Impedance Maximum Level Mixing Bypass Out phase Mute Electronically Balanced x 2 (Phone Jack) Electronically Balanced x 2 (XLR type) +4dBm 600ohms +18dBm Direct Signal, Reverb Signal ON/OFF Ch. R (Reverb Signal) can be alternated ON/OFF ELECTRIC CHARACTERISTICS Dynamic Range Reverb : more than 78dB Delay : more than 84dB Distortion Direct Signal 0.03% Reverb Signal 0.1% Band Width Direct Signal 20 to 20kHz Reverb Signal 20 to 12kHz Residual Noise Level Reverb mode : less than - 60dBm Delay mode : less than - 66dBm DIMENSIONS (W x H x D) 480 x 89.9 x 342.5mm (18-7/8" x 3-1/2" x 13-1/2") WEIGHT 5.3 kg (11.7 Ibs) POWER SUPPLY U.S./Canadian Model 110V - 120V, 50/60Hz General Model 220V - 240V, 50/60Hz REMOTE CONTROL REV 1 REV 2 REV 3 REV 4 E/R 1 E/R 2 OTHERS USER MEMORY * NOTE: Since natural sounding reverberation is mixed with the direct sound, and hence does not constitute 100% of the sound, the effective dynamic range will nearly always exceed 90 dB. "* 0 dBu is 0.775 volts RMS. This value represents voltage across a high impedance input. dBu is the equivalent of dBu if specified across a 600 ohm load. 28