2014 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 118

Seats Power Lumbar (If Equipped) 1 2 E162734 E164101 Saving a Pre-Set Position 1. Switch the ignition on. 2. Move the memory features to the desired positions using the associated controls. 3. Press and hold button 1 for about two seconds until you hear a single chime. To program position 2, repeat the previous procedure using button 2. Note: You can save a memory pre-set at any time. Recalling a Pre-Set Position: Press and release the pre-set memory button desired. The seat, mirrors, pedals and steering column will move to the position stored for that pre-set. Note: If the easy entry and exit feature is enabled, any memory recall while the ignition is off will move the seat and steering column to the easy entry position. You can recall a programmed memory position: • When the ignition is off. • Or only if the transmission is in park (P), neutral (N), or if the ignition is on. You can program a remote entry transmitter to recall a memory setting. See Keys and Remote Controls (page 48). The control is located on the outboard side of the seat. Press the forward or rearward side of the control for more or less support. MEMORY FUNCTION (IF EQUIPPED) WARNINGS Before activating the seat memory, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts. Do not use the memory function when your vehicle is moving. This feature will automatically recall the position of the driver's seat, power mirrors, optional adjustable pedals and optional steering column. The memory control is located on the outboard side of the driver's seat. 116 F150 (TF6)