2014 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 256

Maintenance Examples of acceptable condensation are: • Presence of thin mist (no streaks, drip marks or droplets). • Fine mist covers less than 50% of the lens. Examples of unacceptable moisture (usually caused by a lamp water leak) are: • Water puddle inside the lamp. • Large water droplets, drip marks or streaks present on the interior of the lens. Take your vehicle to a dealer for service if any of the above conditions of unacceptable moisture are present. E167364 Replacing Fog Lamp Bulbs (If Equipped 3. Remove the two bolts from the tail lamp assembly. Then, carefully pull the lamp assembly from the tailgate pillar by releasing the two retaining tabs. 4. Disconnect the electrical connector from the bulb. E163826 E167365 1. Make sure the headlamps are off. 2. Disconnect the electrical connector from the fog lamp bulb. 3. Turn the bulb counterclockwise and remove it from the fog lamp. 4. Install the new bulb in reverse order. 5. Rotate the bulb socket counterclockwise and remove it from the tail lamp assembly. 6. Install the new bulb in reverse order. Replacing Cargo Lamp and Highmount Brake Lamp Bulbs 1. Make sure the headlamps are off. 2. Remove the two screws and move the lamp assembly away from the vehicle to expose the bulb sockets. Replacing Brake/Tail/Turn/Reverse Lamp Bulbs 1. Make sure the headlamps are off. 2. Open the tailgate to access the tail lamp assemblies 254 F150 (TF6)