2014 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 241
2014 Ford F150 SuperCrew Cab Manual
Page 241 highlights
Maintenance Only use oils certified for gasoline engines by the American Petroleum Institute (API). An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers. 1. Check the engine oil level. 2. If the engine oil level is not within the normal range, add engine oil that meets Ford specifications. See Capacities and Specifications (page 295). 3. Remove the engine oil filler cap and use a funnel to pour the engine oil into the opening. 4. Recheck the engine oil level. Make sure the oil level is not above the normal operating range on the engine oil level dipstick. 5. Install the engine oil level dipstick and ensure it is fully seated. 6. Fully install the engine oil filler cap by turning the filler cap clockwise until three clicks are heard or until the cap is fully seated. TRANSFER CASE FLUID CHECK E170444 1. Clean the area around the filler plug. 2. Remove the filler plug. 3. Inspect the fluid level. The fluid level should be within 0.40 in (10mm) from the bottom of the hole. 4. Add fluid through the filler opening, fill to the bottom of the opening. Use only fluid that meets Ford specifications. Refer to the See Capacities and Specifications (page 295). 239 F150 (TF6)