2014 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 128
2014 Ford F150 SuperCrew Cab Manual
Page 128 highlights
Universal Garage Door Opener (If Equipped) In-vehicle Programming This process is to program your hand-held transmitter and your in-vehicle HomeLink button. Note: Put a new battery in the hand-held transmitter. This will ensure quicker training and accurate transmission of the radio-frequency signal. If the indicator light flashes rapidly for two seconds and then turns to a constant light, you have not programmed the HomeLink button yet. Do the following: Press and hold the HomeLink button while you press and release the hand-held transmitter button every two seconds. The HomeLink indicator light will flash slowly and then rapidly once the HomeLink function button recognizes and accepts the hand-held transmitter's radio frequency signal. After programming the HomeLink button, begin programming your garage door opener motor. E142658 1. With your vehicle parked outside of the garage, turn your ignition to the on position, but do not start your vehicle. 2. Hold your hand-held garage door transmitter 1-3 inches (2-8 centimeters) away from the HomeLink button that you want to program. 3. Using both hands, simultaneously, press and hold the desired HomeLink button and the hand-held transmitter button. DO NOT release either one until the HomeLink indicator light flashes slowly and then rapidly. When the indicator light flashes rapidly, you can release both buttons. The rapid flashing indicates successful training. 4. Press and hold the HomeLink button you programmed for five seconds, then release. You may need to do this twice to activate the door. If your garage door does not operate, watch the HomeLink indicator light. If the indicator light stays on, the programming is complete. See Programming Your Garage Door Motor later in this section. Note: You may need a ladder to reach the unit and you may need to remove the cover or lamp lens on your garage door opener. E142659 To program additional buttons, repeat Steps 1 - 4. For questions or comments, please contact HomeLink at www.homelink.com or 1-800-355-3515. Programming Your Garage Door Opener Motor 1. Press the learn button on the garage door opener motor and then you have 30 seconds to complete the next two steps. 2. Return to your vehicle. 126 F150 (TF6)