2014 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 293

Wheels and Tires E166716 E142551 2. Fully insert the jack handle through the bumper hole and into the guide tube through the access hole in the rear bumper. 3. Turn the handle counterclockwise until the tire is lowered to the ground, the tire can be slid rearward and the cable is slightly slack. 4. Slide the retainer through the center of the wheel. 5. Block the diagonally opposite wheel. Obtain the spare tire and jack from their storage locations. Note: The F-150 SVT Raptor also includes a chock, saddle extension and wing bolt.Use the tip of the lug wrench to remove any wheel trim that is blocking the lug nuts. 6. Loosen each wheel lug nut one-half turn counterclockwise, but do not remove them until the wheel is raised off the ground. Note: For the F-150 SVT Raptor, install the saddle extension on the jack as shown in the jack usage and storage instructions. Jacking the vehicle Front E166717 Note: Use the frame rail as the jacking location point, not the control arm. Note: For the F-150 SVT Raptor, you must always use the jack saddle extension. 291 F150 (TF6)