3Com 3CR858-91 User Guide - Page 40

LAN Settings, Enable or Disable the DHCP Server Function. By default, DHCP is

Get 3Com 3CR858-91 - OfficeConnect Cable/DSL Router PDF manuals and user guides
UPC - 662705490946
View all 3Com 3CR858-91 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

40 CHAPTER 5: ROUTER CONFIGURATION Figure 23 Main menu and Firewall sub-menu LAN Settings Your Router is equipped with a DHCP server that will automatically assign IP addresses to each computer on your network. The factory default settings for the DHCP server will work in most applications. If you need to make changes to the settings, you can do so. The changes that you can make are: ■ Change the Internal IP address of the Router. The default is 192.168.1.1 ■ Change the Subnet Mask. The default is 255.255.255.0 ■ Enable or Disable the DHCP Server Function. By default, DHCP is On (Enabled) ■ Specify the Start and End IP Pool Address. The default is for the address range to start at 192.168.1.2 and end at 192.168.1.254 ■ Specify the IP address Lease Time. The default is half day ■ If required, specify a local Domain Name ■ If you use 3Com NBX telephones, specify an NBX call processor The Router also provides you with a list of all client computers connected to the network. You can manage this list as described in "DHCP Clients List" on page 42.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
40
C
HAPTER
5: R
OUTER
C
ONFIGURATION
Figure 23
Main menu and Firewall sub-menu
LAN Settings
Your Router is equipped with a DHCP server that will automatically assign
IP addresses to each computer on your network. The factory default
settings for the DHCP server will work in most applications. If you need to
make changes to the settings, you can do so.
The changes that you can make are:
■
Change the Internal IP address of the Router. The default is
192.168.1.1
■
Change the Subnet Mask. The default is 255.255.255.0
■
Enable or Disable the DHCP Server Function. By default, DHCP is On
(Enabled)
■
Specify the Start and End IP Pool Address. The default is for the
address range to start at 192.168.1.2 and end at 192.168.1.254
■
Specify the IP address Lease Time. The default is half day
■
If required, specify a local Domain Name
■
If you use 3Com NBX telephones, specify an NBX call processor
The Router also provides you with a list of all client computers connected
to the network. You can manage this list as described in
“DHCP Clients
List”
on
page 42
.