3Com 3CR858-91 User Guide - Page 71
SNMP, SNMP Simple Network Management Protocol allows remote
UPC - 662705490946
View all 3Com 3CR858-91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
SNMP SNMP 71 ■ Select either Network or Host as the local type setting. ■ Enter the Remote Server IP address in the text box. 8 If you want to enter details of the remote network, check the Remote Network Setting - Enable check box, then enter the Remote Network Address and Remote Subnet Mask. 9 Click Apply to save the settings. SNMP (Simple Network Management Protocol) allows remote management of your Router by a PC that has an SNMP management agent installed. You can configure the following SNMP parameters: ■ Community - This configures the SNMP community string, which authenticates remote users. ■ Trap - You can also configure the Router to send status messages to the SNMP management agent if a problem occurs on the network. This is done by using Traps. To set up SNMP Community and Trap parameters, do the following: 1 Select SNMP from the main menu. The SNMP screen displays (Figure 48). Figure 48 SNMP Screen 2 Select Enable to activate SNMP.