3Com 3CR858-91 User Guide - Page 83
The Router supports the Routing Information Protocol RIP. RIP allows,
UPC - 662705490946
View all 3Com 3CR858-91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Advanced 83 ■ Subnet Mask - the subnet mask of the route. If network address and subnet mask are both set to 0.0.0.0, this is the default route. ■ Gateway - the gateway used to route data to the network specified by the network address. To configure a static route: 1 Click on Add to add a new route, or click Edit in the Configure column to edit an existing entry. The Add/Edit Static Route screen displays (Figure 57). You can delete an existing entry by clicking on delete in the Configure column. Figure 57 Add/Edit Static Route Screen 2 Enter the Network Address, Subnet Mask and Gateway for this route, and click Apply. The route is added to the Static Route table. RIP The Router supports the Routing Information Protocol (RIP). RIP allows you to set up routing information on one RIP enabled device, and have that routing information replicated to all RIP enabled devices on the network. LAN and WAN interfaces can be configured independently of each other. Select the RIP tab from the Advanced > Routing sub-menu to display the screen shown in Figure 58