Adaptec 29320A-R User Guide - Page 105
Swapping a Host Adapter
UPC - 760884155226
View all Adaptec 29320A-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Installing the SCSI Driver for Windows NT 4.0 To eliminate the Warning message, you must update the Windows NT 4.0 software configuration, described as follows: Removing a Host Adapter in Windows NT 4.0 1 From the Control Panel, double-click the SCSI Adapters icon. 2 Click the Drivers tab. 3 Using the arrow keys select the following driver: Adaptec Ultra320 Family PCI SCSI Controller (NT 4.0) 4 Click the Remove button. 5 If you are sure you are removing the correct host adapter type, click Yes. 6 Click Yes to restart the computer and initialize changes. Click No to return to the SCSI Adapters window. Note: Windows NT 4.0 Setup does not delete the device driver from your system disk; it only updates Windows NT 4.0 software configuration information so that the device driver is no longer loaded during system startup. Swapping a Host Adapter Swapping an Ultra320 Family host adapter for a non-Ultra320 host adapter is similar to the procedure for adding a host adapter. The important distinction is that you make all software configuration changes while Windows NT 4.0 is running and before you make the hardware changes. Note: If you do not install the driver that comes with the new host adapter, it may result in a Windows NT 4.0 boot failure. 9-7