Adaptec 29320A-R User Guide - Page 57

Adaptec Ultra320 SCSI Cards User's Guide If you select Advanced Configuration Options, the Advanced Configuration Options menu appears. To change a setting in the Advanced Configuration Options menu, select the setting. From the pop-up menu that appears, select a new setting. Adaptec SCSISelect(TM) Utility vX.XX Advanced Configuration Options 11 Reset SCSI Bus at IC Initialization Enabled Display Message During BIOS Initialization......7 Enabled Extended Int 13 Translation for DOS Drives >1 GByte.......E..n.a..b..le..d......... Enabled POST Display Mode E..n..a..b.l.e..d.........Verbose SCSI Controller Int 13 Support Enabled Press Options Listed Below Have NO EFFECT if Int 13 SuPprepsosrtabled - Reset to Host Adapter Defaults Domain Validation Enabled Support Removable Disks Under Int 13 as Fixed Disks Disabled BIOS Support for Bootable CD-ROM Enabled Arrow keys to move cursor, to select option, to exit (* = default) 5 When you are finished changing settings, press Esc until a message prompts you to save the changes. To save the changes, select Yes. To abandon the changes, select No. 6 Press Esc until prompted to exit the utility. Then, select Yes. The computer prompts you if a restart is needed for your new settings to take effect. (Changing the Master SCSI Controller setting or running the standalone SCSI utility forces an automatic restart.) Otherwise, your new settings take effect immediately. Using SCSI Disk Utilities The disk utilities provide options for: s Listing SCSI IDs and LUNs s Verifying or Formatting a disk Listing SCSI IDs and LUNs With SCSISelect, you can list the SCSI IDs of devices attached to the SCSI card. This enables you to quickly verify that no devices on the SCSI bus have duplicate IDs. 3-16