Adaptec 29320A-R User Guide - Page 71
Deleting Arrays, Adding a Spare Drive
UPC - 760884155226
View all Adaptec 29320A-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Using the SCSISelect Utility to Manage Arrays To add a spare to an existing RAID 10 array, see Adding a Spare Drive on page 4-11. Deleting Arrays To delete an array: 1 From the Main menu, select the array you need to delete by moving the cursor, then press Enter. 2 Press D. The following message appears: Delete Array? 3 For RAID 0 and RAID 10, go to Step 4. For RAID 1, select one of these options, then continue to Step 4: s Drive ID 1-deletes out all data on the drive 1 s Drive ID 2-deletes out all data on the drive 2 s Drive ID 1 & 2-deletes all data on both drives s None-breaks the array but keeps any existing data on both drives 4 Select Yes and press Enter. The following message appears: Are you sure? 5 Select Yes and press Enter. If you select No, you will return to the Main menu. Adding a Spare Drive With RAID 1 or RAID 10 you have the option to create a maximum of 2 spare drives. You can create a spare before you define your RAID or you can add a spare later to an existing RAID 1 or RAID 10 array. To create a spare prior to defining a RAID, or add to an existing RAID 1 or RAID 10 array: 1 From the Main menu, press S to add a spare. The following options appear: Add Spare Delete Spare (only available if a spare already exists) 4-11