Adaptec 29320A-R User Guide - Page 79

Adaptec Ultra320 SCSI Cards User's Guide Installing the Driver When Windows XP is Already Installed To update or install the a320raid.sys driver if Windows XP is already installed: 1 Create a Windows driver disk. See Appendix D, Creating Driver Floppy Disks for more information. 2 Start Windows XP. Windows XP will automatically discover the new hardware and start the Found New Hardware Wizard to guide you through the device driver installation. 3 At the Welcome to the Found New Hardware Wizard window, select Install from a list or specific location (Advanced), then click Next. 4 Select search removable media (floppy, CD-ROM...), then insert the Windows driver disk you created into your floppy disk drive and click Next. 5 Select Adaptec HostRAID U320 Driver for Windows 2000/XP at the location a:\win32\a320raid.inf from the list, then click the Next button. 6 Click the Next button again to confirm the installation of the driver. You may be prompted with this warning message: "The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP." Click Continue Anyway to continue the installation. 7 When the driver is copied on the hard drive, click Finish. 8 You will be prompted to restart the computer. Select Yes. 5-4