Adaptec 29320A-R User Guide - Page 53
Changing Configuration Settings
UPC - 760884155226
View all Adaptec 29320A-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Adaptec Ultra320 SCSI Cards User's Guide Changing Configuration Settings The factory default settings for the Adaptec SCSI Card are correct for most computers. However, if you need to change the settings for the SCSI card or a SCSI device: 1 If you have not yet installed the SCSI card and the SCSI devices, do so now. Refer to your SCSI card Installation Guide for details. 2 Start SCSISelect. See Starting SCSISelect on page 3-3. SCSISelect detects all Adaptec SCSI cards and displays the model number, channel letter, slot number, and PCI address for each card and channel. Channels are listed separately. 3 Select a channel and press Enter. Adaptec SCSISelect(TM) Utility vX.XX 39320A A at slot 6, 00:0E:00 39320A B at slot 6, 00:0E:01 Arrow keys to move cursor, to select option, to exit (*=default) 4 The Options menu appears. Select Configure/View SCSI Controller Settings. (For details on Using SCSI Disk Utilities, see page 3-16.) Adaptec SCSISelect(TM) Utility vX.XX 39320A at slot 6, 00:0E:00 Would you like to configure the SCSI controller, configure HostRAID settings, or run the SCSI disk utilities? Select the option and press . Options Configure/View SCSI Controller Settings SCSI Disk Utilities move cursor, accept option, exit (*=default) 3-12