Adaptec 29320A-R User Guide - Page 187
Completing the Adaptec Ultra320 SCSI Driver Installation
UPC - 760884155226
View all Adaptec 29320A-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Adaptec Ultra320 SCSI Cards User's Guide 8 Repeat Steps 4 through 7 if there is another array. You will also need to delete any spares. 9 Once all the arrays and spares have been deleted, press Esc to go back to the SCSISelect menu. 10 Use the arrow keys to select Configure/View SCSI Controller and press Enter. 11 From the Configuration menu, select HostRAID and press Enter. 12 From the HostRAID Pop-up menu, select Disabled. 13 Press Esc, save change, then exit. Completing the Adaptec Ultra320 SCSI Driver Installation After you have installed the Adaptec Ultra320 SCSI driver and disabled HostRAID support, you need to complete the installation so that the Windows operating system can detect the new driver hardware. To complete your Adaptec Ultra320 SCSI driver installation, follow these steps: 1 Restart Windows 2000. Windows 2000 will automatically discover the new hardware and will prompt you for the Adaptec Ultra320 SCSI Card CD. 2 You may be prompted with this warning message: "The software you are about to install does not contain a Microsoft Digital Signature..." Ignore the warning and click Yes to continue. 3 Insert the Adaptec Installation CD into the CD-ROM drive when prompted, click on the path D:\drivers\windows\win32bit (where D: is the CD-ROM drive letter), then click OK. F-4