Adaptec 29320A-R User Guide - Page 109
Error Messages
UPC - 760884155226
View all Adaptec 29320A-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Installing the SCSI Driver for Windows NT 4.0 6 At the DOS prompt do a change directory to I386. 7 Once you are in the I386 directory, type WinNT /B. This should begin a floppy-less installation of Windows NT 4.0. The installation process should be able to find the SCSI controller since the OEMSETUP.INF and drivers are current for your SCSI card. The system is hanging and I can't copy files. All of Intel's Pentium Processors require adequate heat sinks and ventilation. If the processor is running excessively hot, this can cause problems when installing Windows NT 4.0 (such as hanging or not being able to copy files). Make sure you have an adequately sized heat sink and good ventilation. If you're overclocking your processor, then set it back to the manufacturers default clock speed. Error Messages Error messages generated by the adpu320.sys driver can be viewed by opening the Windows NT 4.0 Event Viewer error logs. For more information on these Error Messages, see Appendix B, Windows Error Messages. 9-11