Adaptec 29320A-R User Guide - Page 179

Migrating From Adaptec Ultra320 SCSI to HostRAID Migrating With Windows XP Installing the HostRAID Driver To migrate the boot channel on a SCSI card from SCSI to HostRAID with a Windows XP operating system, follow these steps: 1 Start Windows XP. 2 Go to the Device Manager by clicking on My Computer=> Properties=>Hardware=>Device Manager 3 At the Device Manager, click the + sign next to the SCSI and RAID controllers entry to expand it. 4 There will be two entries representing the dual channels. Right- click on the channel that you are booting from, then select Update Driver. Note: If you are not sure which channel your boot drive is connected to, change the view of the Device Manager to View Devices by Connection, and find out which drives are connecting to which channels. 5 Select Install from a list or specific location (Advanced), then click Next. 6 Select Dont' search, I will choose the driver to install, then click Next. 7 Click the Have Disk button. 8 Insert the Adaptec Installation CD into the CD-ROM drive. If the CD automatically opens a welcome screen, click the Exit button to close it. 9 At the Install From Disk window, click the Browse button and path D:\drivers\windows\win32 (where D: is the CD-ROM drive letter). Click Open. 10 Click OK. 11 Scroll down the list and select your Adaptec HostRAID driver, then click Next. 12 Click Yes when the Update Driver Warning message appears. E-5